I decided to change up the front end look for a little bit. This is a quick article showcasing the inexpensive $26 aftermarket upper and lower grills you can find on Amazon or eBay.
Diamond Grill instead of Honeycomb
Installation
Installation is POP and SWAP. You don’t have to remove the bumper. Remove your old grill by popping it out and angling it out the FRONT of the bumper.
Do the same for the bottom. Install from the front also, angle the new grill in, then simply stick your fingers in the holes and pull it forward to pop the tabs into the bumper cover.
Fitment
The grills mostly fit good. However, there’s a slight gap on the left and right side of the upper grill. I haven’t figured out how I’m going to resolve this, but I’ll update this blog as soon as I do.
